Z3-TANK

AWAH Z3-TANK
AWAH Z3-TANK photo 1

Heavy Lift

AWAH Z3-TANK

Heavy-duty drill-powered ascender and manual descender — the highest-capacity model in the Z3 series, rated to 300 kg. Friction block with 3 rope guide wheels delivers precise, smooth descent control under heavy loads. Built-in gearbox crash self-locking device engages within 10 cm if gears fail. Swivel-equipped main attachment point. IP66 dust-tight and water-resistant gearbox. Electric lift: clockwise rotation. Dual-unit torque rating (Nm and in-lbs) for international operations. Built to XF 494-2023 standard.

Load Range30–300 kg
Weight2.23 kg
RopeEN 1891 11–13 mm
Drill Torque120–180 Nm (1,100–1,600 in-lbs)
SwivelYes (Rotary Joint)
Sub-Attachment MBS22 kN
Gearbox Self-LockingYes (crash self-locking device)
StandardXF 494-2023
Service Life6 years

Applications

Where Z3-TANK Excels

Built for the heaviest lifts in the Z3 series — where maximum capacity and crash safety matter most.

Heavy Industrial Lifting

Rated to 300 kg for steel erection, precast concrete, and heavy material positioning on construction and industrial sites.

Confined Space & Rescue

High-capacity lifting for confined-space entry, tower rescue, and victim evacuation where heavy loads are routine.

Mining & Infrastructure

IP66 gearbox withstands dust and water in mines, tunnels, and outdoor infrastructure maintenance up to 300 kg.

FAQ

Z3-TANK Questions

What makes the Z3-TANK different from other Z3 models?
The Z3-TANK is the highest-capacity model in the Z3 series, rated to 300 kg. It keeps the friction block and 3 guide wheels of the Z3-PROF but adds a swivel and raises the load ceiling from 200 kg to 300 kg. It also displays drill torque in dual units (Nm and in-lbs) for international teams. Like all Z3 models, it has the gearbox crash self-locking device and an IP66-rated gearbox.
Why does the Z3-TANK show torque in both Nm and in-lbs?
Heavy-lift operations often involve international teams and North American equipment specs. Showing drill torque in both Newton-meters and inch-pounds helps teams verify their drill is within the rated range (120–180 Nm / 1,100–1,600 in-lbs, clockwise) without conversion errors. Always use a standard brushless hand drill — never impact drivers or hammer drills.
Is the Z3-TANK CE certified?
No. Like the Z3-PROF and Z3-MINI, the Z3-TANK is built to XF 494-2023 (PRC fire rescue industry standard) and is approved for personnel support under that standard, but it does not carry CE certification. Only the Z3-FIRE is CE certified. Check local regulations before use in EU-regulated environments.

Related Products

Explore Other Models

AWAH Z3-PROF

AWAH Z3-PROF

Professional
AWAH Z3-FIRE

AWAH Z3-FIRE

Fire Rescue
AWAH Z3-MINI

AWAH Z3-MINI

Light Duty